Lam Duc Nguyen, Anders E. Kalør, Israel Leyva‐Mayorga, Petar Popovski
The data collected from Internet of Things (IoT) devices on various emissions or pollution, can have a significant economic value for the stakeholders. This makes it prone to abuse or tampering and brings forward the need to integrate IoT with a Distributed Ledger Technology (DLT) to collect, store, and protect the IoT data. However, DLT brings an additional overhead to the frugal IoT connectivity and symmetrizes the IoT traffic, thus changing the usual assumption that IoT is uplink-oriented. We have implemented a platform that integrates DLTs with a monitoring system based on narrowband IoT (NB-IoT). We evaluate the performance and discuss the tradeoffs in two use cases: data authorization and real-time monitoring.
Blockchain is an emerging field of study in a number of applications and domains. Especially when combine with Internet of Things (IoT) this become truly transformative, opening up new plans of action, improving engagement and revolutionizing many sectors including agriculture. IoT devices are intelligent and have high critical capabilities but low-powered and have less storage, and face many challenges when used in isolation. Maintaining the network and consuming IoT energy by means of redundant or fabricated data transfer lead to consumption of high energy and reduce the life of IoT network. Therefore, an appropriate routing scheme should be in place to ensure consistency and energy efficiency in an IoT network. This research proposes an efficient routing scheme by integrating IoT with Blockchain for distributed nodes which work in a distributed manner to use the communicating links efficiently. The proposed protocol uses smart contracts within heterogeneous IoT networks to find a route to Base Station (BS). Each node can ensure route from an IoT node to sink then base station and permits IoT devices to collaborate during transmission. The proposed routing protocol removes redundant data and blocks IoT architecture attacks and leads to lower consumption of energy and improve the life of network. The performance of this scheme is compared with our existing scheme IoT-based Agriculture and LEACH in Agriculture. Simulation results show that integrating IoT with Blockchain scheme is more efficient, uses low energy, improves throughput and enhances network lifetime.
Iván Froiz-Míguez, Paula Fraga‐Lamas, José Varela-Barbeito, Tiago M. Fernández‐Caramés
The latest advances in the different Industry 4.0 technologies have enabled the automation and optimization of complex tasks of production processes thanks to their ability to monitor and track the state of physical elements like machinery, environmental sensors/actuators or industrial operators. This paper focuses on the latter and presents the design and evaluation of a system for monitoring industrial workers that provides a near real-time decentralized response system aimed at reacting and tracing events that affect operator personal safety and health. Such a monitoring system is based on the information collected from sensors encapsulated in IoT wearables that are used to measure both personal and environmental data. The communications architecture relies on LoRaWAN, an LPWAN (Low-Power Wide-Area Network) technology that offers good reliability in harsh communications environments and that provides relatively long distance communications with low-energy consumption. Specifically, each wearable sends the collected information (e.g., heart rate, altitude, external temperature, gas concentration, location) from the sensors to the nearest LoRaWAN gateway, which is transmitted to a pool of nodes where information is stored in a distributed manner. Such a decentralized system allows for providing information redundancy and guarantees its availability as long as there is an operative node. In addition, the proposed system is able to store and to process the collected data through smart contracts in a blockchain, which eliminate the need for a central backend and ensure the traceability and immutability of such data in order to share them with third parties (e.g., insurance companies or medical services).
The Internet of Things (IoT) is increasingly part of daily life. However, the development of IoT applications still faces many problems, such as heterogeneity, complex management, and other difficulties. In this paper, first, the open source technologies of IoT are surveyed. We compare these technologies from the point of view of different levels of technical requirements, such as device management, data management, communication, intelligent data processing, security and privacy protection; we also look at requirements of application development and deployment. Second, an IoT integrated development platform architecture for IoT applications based on open source ecosystem is proposed and evaluated in an industrial setting. We applied P2P technology to distributed resource management and blockchain-based smart contract mechanics for resource billing management. The results show that the IoT gateway based on an open source ecosystem had a stable and reliable system performance with a certain data size and concurrency scale. These conditions satisfy the application requirements of the IoT in most sensing environments.
Today, the number of Internet of Things (IoT) devices in all aspects of life is increasing exponentially. Our cities are getting smarter and informing us about our surroundings in a contextual manner. However, we face significant challenges in deploying, managing, and collecting data from these devices. In addition, we must address the problem of storing and mining that data for higher-quality IoT services. Blockchain technology, even in today's nascent form, has the potential to be the foundation for a common, distributed, trustless, and autonomous infrastructure system. This article describes a standardized IoT infrastructure where data are stored on a distributed storage service that is fault-tolerant and resistant to distributed denial of service (DDOS) attacks and data access is managed by a decentralized, trustless blockchain. The illustrated system used LoRa as the emerging network technology, Swarm as the distributed data storage platform, and Ethereum as the blockchain platform. Such a data back end will ensure high availability with minimal security risks while replacing traditional back-end systems with a single "smart contract".
Today, the number of IoT devices in all aspects of life is exponentially increasing. The cities we are living in are getting smarter and informing us about our surroundings in a contextual manner. However, there lay significant challenges of deploying, managing and collecting data from these devices, in addition to the problem of storing and mining that data for higher-quality IoT services. Blockchain technology, even in today's nascent form, contains the pillars to create a common, distributed, trustless and autonomous infrastructure system. This paper describes a standardized IoT infrastructure; where data is stored on a DDOS-resistant, fault-tolerant, distributed storage service and data access is managed by a decentralized, trustless blockchain. The illustrated system used LoRa as the emerging network technology, Swarm as the distributed data storage and Ethereum as the blockchain platform. Such a data backend will ensure high availability with minimal security risks while replacing traditional backend systems with a single "smart contract".
Sina Rafati Niya, Sanjiv S. Jha, Thomas Bocek, Burkhard Stiller
This work proposes an IoT- and Blockchain-based, distributed system, for automated measuring, storing, and monitoring of water and air quality in environments such as lakes, mountains, urban areas, or factories. Comparable state-of-the-art solutions, require human interaction to access the data or require high power consumption or space requirements, or they are based on centralized architectures. The proposed pollution monitoring system here, on one hand, employs LoRa to address the high power consumption and long-range transmission challenges of IoT protocols. On the other hand, it is designed to be fully decentralized by using the Ethereum Blockchain to store and retrieve the data recorded by IoT sensors. Thus, data integrity is provided without the need for a Trusted Third Party (TTP) and data is collected and captured automatically without any manual operations needed. Observations on the four different types of sensors for measuring Potential Hydrogen (PH), Turbidity, Carbon monoxide (CO), and Carbon dioxide (CO2), revealed a high accuracy with the expected time-lines of measurements, non-falsified experimental values collected and can be used as reliable evidence of presence of pollution.
The increasing demand for mobile network capacity driven by Internet of Things (IoT) applications results in the need for understanding better the potential and limitations of 5G networks. Vertical application areas like smart mobility, energy networks, industrial IoT applications, and AR/VR enhanced services all pose different requirements on the use of 5G networks. Some applications need low latency, whereas others need high bandwidth or security support. The goal of this paper is to identify the requirements and to understand the limitations for 5G driven applications. We review application areas and list the typical challenges and requirements posed on 5G networks. A main challenge will be to develop a network architecture being able to dynamically adapt to fluctuating traffic patterns and accommodating various technologies such as edge computing, blockchain based distributed ledger, software defined networking, and virtualization. To inspire future research, we reveal open problems and highlight the need for piloting with 5G applications, with tangible steps, to understand the configuration of 5G networks and the use of applications across multiple vertical industries.
Purpose With the rapid growth of the Internet of Things (IoT) market and requirement, low power wide area (LPWA) technologies have become popular. In various LPWA technologies, Narrow Band IoT (NB-IoT) and long range (LoRa) are two main leading competitive technologies. Compared with NB-IoT networks, which are mainly built and managed by mobile network operators, LoRa wide area networks (LoRaWAN) are mainly operated by private companies or organizations, which suggests two issues: trust of the private network operators and lack of network coverage. This study aims to propose a conceptual architecture design of a blockchain built-in solution for LoRaWAN network servers to solve these two issues for LoRaWAN IoT solution. Design/methodology/approach The study proposed modeling, model analysis and architecture design. Findings The proposed solution uses the blockchain technology to build an open, trusted, decentralized and tamper-proof system, which provides the indisputable mechanism to verify that the data of a transaction has existed at a specific time in the network. Originality/value To the best of our knowledge, this is the first work that integrates blockchain technology and LoRaWAN IoT technology.