An All-Passive Negative Feedback Network for Broadband and Wide Field-of-View Self-Steering Beam-Forming With Zero DC Power Consumption

Abstract

This paper presents an all-passive negative feedback network that performs autonomous radio-frequency (RF) front-end beam-forming and dynamic beam-tracking toward the direction of the incident RF signal. The proposed feedback network consists of a passive RF signal processing network, voltage rectifiers, and voltage-controlled delay-line phased shifters, all of which are passive-only circuits. The negative feedback loop is realized by passive phase detection, phase-to-voltage conversion, and voltage-controlled phase shifting, achieving a large loop-gain and autonomous operation with zero DC power consumption. The nonlinear behavior of the loop is exploited to substantially expand the array field of view (FoV). A proof-of-concept broadband four-element all-passive self-steering beam-former at 5 GHz with a wide FoV is implemented in a standard 130 nm CMOS process. A high-quality four-element synthesized array factor is measured for the input progressive phase shift φinfrom -180° to 180°. When the proposed negative feedback loop is enabled, the normalized array factor is -2.87/-2.8 dB at φin= +90°/-90° with an input RF power Pin of -17 dBm/element at 5 GHz, achieving >25 dB array factor improvement over the open-loop operation. Moreover, the nonlinear feedback loop allows for significant array factor improvement even at φin= +180°/-180°. The proposed beam-former also achieves high-quality self-steering beamforming from 4 to 5.68 GHz with 34.7% fractional bandwidth. Therefore, the proof-of-concept all-passive self-steering beamformer outperforms the state-of-the-art active designs in terms of beam-forming quality, FoV, and fractional bandwidth. To the best of the authors' knowledge, this is the first demonstration of an all-passive negative feedback network for a broadband and wide FoV self-steering beam-forming with zero DC power consumption.